how do i speed of the foam settling in a beer bong?

Posted on September 29, 2009 by admin

I made a 5 foot beer bong with a valve that can hold about 4-5 beers. I dont have a problem with foam there.

But when i load up one, almost the half top of the tubing is filled with foam. I understand that foaming is normal, but I want that foam to turn into beer because every drop counts :) .

I’ve heard about people using a pinch of salt to kill the foam, but i dont want to mess with the taste what so ever.

any thing i can do to speed up the foam condensing process?

The answer to your question is simple, don’t create the foam, therefor you won’t have to speed the settling. Pour slowly, remember it’s the speed of the drink, not the pour that makes a successful Beer Bong!

This entry was posted in foam. Bookmark the permalink.

7 Responses to how do i speed of the foam settling in a beer bong?

  1. OkieBoy says:
    September 30, 2009 at 3:50 am

    Why would you want to put perfectly good beer in a bong?…………You Heathen!
    References :

  2. blessed_thang says:
    September 30, 2009 at 4:34 am

    If you wet the glass first, then the foam cannot grip the sides to form a lid. The liquid rises and crushes the bottom bubbles.
    References :

  3. Mark F says:
    September 30, 2009 at 4:45 am

    ok listen very carfully first twist a fattie then have a buddy tilt the bong while you CARFULLY and slowly pour the beer down the side of the bong. the light the fattie, and pro0ceed in doing the same with the other beers.thn put the roach in a jar so it doesn’t smell when your parents come home
    References :

  4. Matt B says:
    September 30, 2009 at 5:17 am

    The answer to your question is simple, don’t create the foam, therefor you won’t have to speed the settling. Pour slowly, remember it’s the speed of the drink, not the pour that makes a successful Beer Bong!
    References :
    Experience

  5. Dawn P says:
    September 30, 2009 at 5:49 am

    Hold each at a 45 degree angle and pour slowly
    References :

  6. ahvismommy says:
    September 30, 2009 at 6:26 am

    What you can do is pour the beer slowly against the container and not directly into it. What makes the beer foam is the beer rapidly hitting the rest of the beer in the container. If you make sure you pour the beer so it travels down the side of the container… you’ll end up with more beer!!!
    References :

  7. Michael S says:
    September 30, 2009 at 6:37 am

    Angle the bong towards the beer and slowly pour. This is how beer should always be poured, created very little head. Another trick is get the person who is going to hit the bong (because otherwise its gross) to rub their finger against the sides of their nose, then take the finger and swirl it around in the foam.
    References :
    I’ve drank alot of beer, and done alot of beer bongs.